Industrial lifting

Installation and maintenance of elevator shafts

Electric hoist for lift manufacturers LIFTHO ® 1000

LIFTHO ® 1000 hoist for lift manufacturers

LIFTHO ® 1000 hoist for lift manufacturers

The LIFTHO ® 1000 hoist is specially designed for the construction of elevator shafts. This electric hoist, with automatic wire-rope passage, has a lifting capacity of 1000 kg. It is designed as a sturdy, easy to handle and ergonomic hoist.

The LIFTHO® 1000 hoist is dedicated to the lifting of personnel and must be associated with a safety gear system.

LIFTHO® 1000 complies with the EN 1808 standard when it is combined with a SECURICHUTE fall-prevention system

This hoist is often accompanied during its use by a LM 300 or LM 500 equipment lifting hoist, to enable handling of materials along the elevator shaft.

Technical Characteristics

Load limiter
Controlled manual descent in case of power failure
Service brake without power
Motor protected by a temperature sensor
End of stroke contact
Button box control
Removable travel wheels and carrying handles (in option)
Front hook (option)

	LIFTHO ® 1000 M	LIFTHO ® 1000 M	LIFTHO ® 1000 T
motorization	230 V- 50 Hz	110 V - 50 Hz	400 V - 50 Hz
motor power	1.3 kW	1.1 kW	1.25 kW
current	11.5 A	26.4 A	6 A
starting peak	41.2 A	101.8 A	20 A
hoist weight	75 kg	75 kg	75 kg
lifting capacity	1000 kg	1000 kg	1000 kg
climbing speed	9m/min	9m/min	9m/min
emergency descent	4.5m/min	4.5m/min	4.5m/min
wire-rope diameter	10.2 mm	10.2 mm	10.2 mm

Associated products

	LM 500 electric work site hoist
	Fall-prevention systems for electric hoists: SECURICHUTE
	Snatch block and guide pulley
	LIFTHO ® 500 hoist for lift manufacturers


> Return to the list